Installing a Brand New Shower Fixture: A Complete Handbook

Request An Appointment

The article author is making several great points on How to Install a Direct-to-Stud Shower Enclosure as a whole in the article underneath.

A successful shower installation calls for mindful planning and also a lot of work. In many cases, you will certainly need to do three types of tasks: framing wall surfaces, setting up the plumbing, and also ending up walls.

Prep work

First of all, you have to decide on the type of shower that you wish to install. It is very important to identify whether the chosen shower can dealing with certain systems and also can manage a safe level of water via the central heating boiler. Many shower systems nowadays are made to be adaptable to various water stress (such as kept hot water as well as cold mains).
It is also important to take into consideration the water pressure and also the preparation of the piping and water drainage for the shower

Different Sorts Of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower device can be linked to the bathroom faucet according to your demand, and also the water temperature can be readjusted by means of the taps. Push-on mixers are cheap as well as extremely simple to install. However, although the hose pipe link is basic, it is quickly dislodged. Furthermore, it is inconvenient to change the temperature.

Bath/Shower Mixer: The pipe and spray of this type of shower are integrated with a bathroom mixer faucet, and the temperature level can be readjusted with the bathroom faucets. It is a really affordable alternative as well as no extra plumbing is involved. However, the bath/shower mixers also suffer from troublesome temperature level control alternatives.

Handbook Mixer: The hose and also spray of a manual mixer shower unit are a part of the wall system and the hot and cold water products are linked to a single shutoff The temperature as well as stress of the water are managed via either one or a selection of handles (in extra costly showers). Although temperature control is a lot easier in hands-on mixer types, they are more expensive than the formerly mentioned mixers. They likewise need additional plumbing of hot and cold water supply pipes.

Thermostatic Mixer: The tube and also spray of this shower kind belong of the wall surface system as well as the cold and hot water materials are connected to a single shutoff here also. It is total with a built-in stabiliser to self-adjust the water temperature and also to prevent it from coming to be as well warm. Among the biggest advantages of a thermostatic mixer shower type consists of practical temperature control. Nevertheless, it is the most pricey of the different mixer options.

Power Shower: A power shower is a single unit containing an effective electrical pump that is capable of changing both the water pressure as well as temperature level. This kind of shower can be fitted if there is water from a cold water tank and a hot water cylinder. A power shower makes the adjustment of both pressure as well as temperature simple. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is provided by a mix central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and also it heats the water electrically. It is important to keep in mind that for this shower type to be mounted, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature and pressure to be readjusted through a handle. Designs with temperature stabilisers are much better as they continue to be untouched by other faucets elsewhere being used within the house. A major drawback of electric showers is that the control handle only permits the alternative of heats at less pressure, or lower temperature levels at a greater pressure. This is bothersome in the winter when the spray is often weak and also the keys water is chillier. Nonetheless, this trouble is taken on in some versions which are available with a winter/summer setup.

Method

Depending on the sort of shower you desire to mount, the shower head should either be suited order to prevent its contact with the water in the bath below or the base tray, or it must have a check shutoff.
Before beginning, it is recommended to note the positions of the shower head and also control, as well as to plan the pipe-work entailed. Additionally, the drain system to get rid of the waste water will certainly require to be intended. Both positions of the cord route and the shower switch will certainly likewise require to be considered if an instant or electrical shower device is being installed.
Use the direction overview offered with the shower system to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to remove the supply of water. In order to protect the pipelines, they should be offered a water-proof covering and likewise fitted with separating valves. The pipelines can after that be hidden into the wall surface and also plastered over to neaten the general look.
Fit the base tray, shower head, as well as fittings.
Link the major shower control to the pipelines that will certainly be supplying the water (This might need a female screw string adapter).
Reconnect the water system and also test the pipelines for any leaks, as some might need tightening up.
If you are setting up an electric shower, bear in mind to switch off the power supply before making any type of electrical connections. Once these connections have been made (there must be advice within the instruction manual), the power supply can be switched over back on.

Changing Water Pressure to Fit Your Shower

The cold water storage tank can be raised to a greater elevation (occasionally as little as 150mm (6inches)) by fitting a strong wood support beneath it - possibly composed of struts and blockboards. If you select this alternative, the major and also circulation pipes will certainly additionally need to be raised to fulfill the brand-new elevation of the storage tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be attached right into the power supply in order to run.

Piping and also Drain

It is best to utilize 15mm size supply pipes, and also make the go to the shower as brief and straight as feasible so as to keep optimal stress and also minimise heat loss. Furthermore, by minimising the use of joints for pipe edges, you can decrease the resistance in the flow of the water supply. You can accomplish this by flexing the pipes instead.

Many Typical Errors

Breaking or ignoring local code constraints.

Using pipelines that are as well little.

Attaching copper to galvanized without making use of a brass or dielectric suitable in between both.

Not utilizing tape or pipeline substance at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling for fixtures.

Cutting supply stub outs too brief to set up the shutoff valves onto after the finished wall remains in area.

Not correctly aligning tubes into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will cause a leak.).

When turning the water back on in your house, constantly run the outside tube valve or flush your bathrooms to hemorrhage dirt and air from the lines. This particles can create problems in your sink faucets and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a serious person who reads on Simple ways to Install a Shower Cubicle on Your Own, I imagined sharing that information was worth the trouble. Enjoyed our blog posting? Please share it. Let another person find it. I recognize the value of reading our article about How to Install a Shower Enclosure .

Book-Now